Brother MFC-J430w Panduan Pengaturan Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother MFC-J430w. Brother MFC-J430w 37 halaman. Product safety guide - spanish
Juga untuk Brother MFC-J430w: Panduan Pengguna Tingkat Lanjut (47 halaman), Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Keselamatan (17 halaman), Panduan Pengguna (41 halaman), Panduan Memulai Cepat (37 halaman), Panduan Memulai Cepat (22 halaman), Panduan Pengguna (40 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman)

Install the ink cartridges

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

Note

Make sure you install the Starter Ink Cartridges

included with your machine first.

Make sure that the power is turned on.

The LCD will show No Ink Cartridge.

Open the ink cartridge cover a.

Remove the orange protective part a.

Note

Do not throw away the orange protective part.

You will need it if you transport the machine.

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a clockwise until it clicks to

release the vacuum seal. Then remove the

orange protective packing a as shown.

IMPORTANT

DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

Take care to match the color of the lever a

with the cartridge color b, as shown in the

diagram below.

Install each ink cartridge in the direction of the

arrow on the label.

1 1