Brother MFC-J430w Panduan Pengguna - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Brother MFC-J430w. Brother MFC-J430w 40 halaman. Product safety guide - spanish
Juga untuk Brother MFC-J430w: Panduan Pengguna Tingkat Lanjut (47 halaman), Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Keselamatan (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Pengguna (41 halaman), Panduan Memulai Cepat (37 halaman), Panduan Memulai Cepat (22 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman)

Halaman Cetak

Making copies

Copy settings

You can change the copy settings temporarily

for multiple copies.

The machine returns to its default settings

after being idle for 1 minute, or if the Mode

Timer returns the machine to Fax mode. (See

Mode Timer uu page 3.)

To change a setting, press COPY and then

press a or b to scroll through the copy

settings. When the setting you want is

highlighted, press OK.

When you are finished choosing settings,

press Mono Start or Colour Start.

Note

You can save some of the settings that

you use most often by setting them as

default. These settings will remain until

you change them again. (See Setting your

changes as a new default uu page 23.)

Stop copying

To stop copying, press Stop/Exit.

Changing copy speed and

quality

You can choose from a range of speed and

quality. The factory setting is Normal.



Fast

Fast copy speed and lowest amount of ink

used. Use to save time printing

documents to be proof-read, large

documents or many copies.



Normal

Normal is the recommended mode for

ordinary print outs. This produces good

copy quality with good copy speed.



Best

Use Best mode to copy precise images

such as photographs. This provides the

highest resolution and slowest speed.

Press

Load your document.

Enter the number of copies you want.

Press a or b to choose Quality.

Press OK.

Press a or b to choose Fast, Normal or

Best.

Press OK.

If you do not want to change additional

settings, press Mono Start or

Colour Start.

(COPY).