Brother MFC-J435W Panduan Pengaturan Cepat - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother MFC-J435W. Brother MFC-J435W 37 halaman. Product safety guide - spanish
Juga untuk Brother MFC-J435W: Panduan Pengguna Tingkat Lanjut (47 halaman), Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Keselamatan (17 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman)

For Wireless Network Users

Enter the Network Key you wrote down in

step 19-a on page 20 and then enter the key

again in Confirm Network Key, then click

Next.

Note

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to k.

Click Next. The settings will be sent to your

machine.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• If the wireless setup failure screen appears,

click Retry.

Disconnect the USB cable between the

computer and the machine.

Click Next to continue to install MFL-Pro Suite.

Wireless setup is now complete. A four

level indicator at the upper right of your

machine's LCD will show the wireless

signal strength of your access

point/router.

To install MFL-Pro Suite, continue to

step 22-e on page 30.

Now go to

Page 30