Brother MFC-J835DW Panduan Pengaturan Cepat - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother MFC-J835DW. Brother MFC-J835DW 45 halaman. Quick setup guide - spanish
Juga untuk Brother MFC-J835DW: Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Manual Koneksi Web (22 halaman), Panduan Keselamatan (17 halaman), Panduan Pemecahan Masalah (6 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (44 halaman)

Wired Network

For wired network interface users

Before you install

Make sure your machine is connected to the power

and your Macintosh is ON. You must be logged on

with Administrator rights.

Note

• For Mac OS X 10.4.0 to 10.4.10 users, upgrade

to Mac OS X 10.4.11 - 10.6.x.

• If you have previously set up your machine for

a wireless network and then want to set it up on

a wired network, you should check that the

machine's Network I/F is set to

Wired LAN. The wireless network interface

will become inactive with this setting.

On your machine, press Menu.

Press Network.

Press a or b to display Network I/F.

Press Network I/F.

Press Wired LAN.

Press Stop/Exit.

(Mac OS X 10.4.11, 10.5.x, 10.6.x)

Connect the network

cable

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

You will find the LAN socket marked with a

symbol inside the machine on the left as shown

below. Remove the protective cap and connect

the network cable to the LAN socket.

Macintosh

USB