Fujitsu FTP-641MCL352 Lembar Spesifikasi - Halaman 3
Jelajahi secara online atau unduh pdf Lembar Spesifikasi untuk Printer Fujitsu FTP-641MCL352. Fujitsu FTP-641MCL352 6 halaman. 24v drive, ultra high speed line thermal printer 4” mechanism, with or without cutter
Halaman Cetak
(Continued)
Item
For head
Power supply
For motor
For logic
Weight
Mechanism + cutter
Dimensions
Interface board
Thermal head
Life
Cutter
Operating temperature
Operating humidity
Environmental
conditions
Storage temperature
Storage humidity
Head temperature
Detection
Paper out/Mark detect
Head-up
Paper width
Recommended thermal sensitive
4
paper*
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25 C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40 C.
*4: Please contact us for other thermal papers.
2
24 VDC
5%, average:*
0.82 (1.11) A (at 25 mm/s printing speed, 25% printing ratio)
1.25 (1.66) A (at 50 mm/s printing speed, 25% printing ratio)
4.75 (6.30) A (at 50 mm/s printing speed, 100% printing ratio)
( ): Peak
24 VDC
5%, 1.0 A maximum
5 VDC
5%, 0.5 A maximum
Mechanism with cutter: approximately 610 g
Interface board: approximately 100 g
159 (W)
60 (D)
71.0 (H) mm (excluding connector)
140 (W)
89 (D)
24.0 (H) mm
7
Pulse durability : 5
10
pulse/dot (using Fujitsu & Takamisawa's
standard driving method)
Wear resistance : 50 km (at 12.5% printing ratio)
5
Cutting life: 3
10
times
3
+5 to +40 C*
20 to 85% RH (no condensation)
–20 to +60 C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter (command set)
By microswitch
+0
114 mm
–1
1 ply paper in roll
:
FTP-641MCL351/352
Specifications
FTP-040P0020
3