Fujitsu S510M - ScanSnap - Document Scanner Panduan Memulai - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Printer Fujitsu S510M - ScanSnap - Document Scanner. Fujitsu S510M - ScanSnap - Document Scanner 24 halaman. Color image scanner
Juga untuk Fujitsu S510M - ScanSnap - Document Scanner: Prosedur Instalasi (3 halaman), Spesifikasi (2 halaman), Panduan Instalasi Cepat (2 halaman), Panduan Memulai (35 halaman), Petunjuk Pembersihan (2 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak
Fujitsu S510M - ScanSnap - Document Scanner Panduan Memulai
Make sure that the Pad ASSY is firmly
ATTENTION
secured. If it is not secured, documents will
jam or other feeding errors may occur.
5. Close the ADF
ADF
Gently push the ADF until you hear it click when
returning it to its original position.
6. Turn on the scanner.
The ScanSnap Manager icon changes from the
inactive state
7. Click and hold down the mouse button on the
ScanSnap Manager icon
select [Check consumable supplies] from the menu.
8. In the "Check consumable status" window, click the
[Reset] button of the consumable you replaced.
A confirmation pop-up screen appears.
If you click the [Yes] button, the counter is reset to
"0."
to the active state
.
in the Dock menu, and

6.3. Replacing the Pick Roller

Replace the Pick roller following the procedures below.
1. Remove the document on the Paper chute if any.
2. Pull the Cover open lever and open the ADF.
Paper chute
ADF
Cover open lever
3. Adjust the Side Guide to the "A5" size.
A5
4. Pinch the handle on the Sheet guide to remove it.
5. Rotate the Pick roller bushing (Left) in the direction of
the arrow.
Pick roller
Pick roller bushing
ScanSnap S510M for Mac Getting Started | 19
A5
Sheet guide
Handle
Claw
Pick roller shaft