Brother Quattro 6000D Panduan Pengguna - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Brother Quattro 6000D. Brother Quattro 6000D 48 halaman. Kit de actualización iii
Juga untuk Brother Quattro 6000D: Manual (42 halaman), Panduan Pengoperasian (50 halaman), Panduan Pengoperasian (6 halaman), Panduan Pengoperasian (29 halaman), Panduan Pengoperasian (21 halaman), (Bahasa Inggris) Buku Petunjuk (49 halaman), (Bahasa Inggris) Buku Petunjuk (21 halaman), (Bahasa Inggris) Buku Petunjuk (48 halaman)

Halaman Cetak

Select the area containing one of the two

stickers, and then press

→ The camera detects the two marks.

Note

• To return to the sewing screen, press

Pressing

, then

connection setting screen (screen for connecting the

selected pattern to the previous one), where the

reference edge and reference point can be selected.

• If the following message appears, press

and then rehoop the fabric so that the centers of the

large circles of the positioning stickers are within the

embroidering area or hoop the fabric in a larger

embroidery frame. After checking that the area

containing one of the two stickers have been

correctly selected in step

The message above also appears when the

positioning sticker is too closely attached to the

perimeters of the embroidering area. In that case,

rehoop the fabric so that the stickers fit more within

the embroidering area.

• If the following message appears, press

and then rehoop the fabric so that the pattern and

the centers of the large circles of the positioning

stickers are within the embroidering area or hoop

the fabric in a larger embroidery frame.

displays the pattern

, press

If the positioning stickers do not fit within the

embroidering area, press

shown below.

Next, press

pattern connection setting screen.

Refer to "CHANGING THE POSITION OF A

STICKER" on page 22 to reposition the sticker.

• If the following message appears, press

return to the pattern editing screen. Check the

pattern size and pattern connection settings, and

then repeat the previous steps.

After the positioning stickers have been

detected, press

stickers.

in the screen

, then

to display the

, and then remove the