Brother RJ-4230B Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Perangkat lunak Brother RJ-4230B. Brother RJ-4230B 2 halaman.
Juga untuk Brother RJ-4230B: Manual (2 halaman), Manual (2 halaman), Panduan Memulai Cepat (2 halaman)

Brother RJ-4230B Manual
4
Connect your device
Mobile (Bluetooth)
Menu
Windows
Visit install.brother and download the latest Software/Documentation Installer.
5
Bundled items and accessories
Belt Clip (Bundled)
Use to carry the printer on your belt.
Shoulder Strap (Accessory)
Use to put the printer on your shoulder.
6
LED indicators
LED indicator
Status
Unlit
• Power off
• Charging complete (when power is turned off)
Green
• Battery level: Half or more
• Charging complete (when power is turned on)
Orange
Charging
Red
Boot mode
Green (flashing)
Sleep mode
Orange (flashing)
Battery level: low
Red (flashing)
• Any error
• Battery level: empty
OK
OK
NFC
* Android™ only
7
Troubleshooting
The printer does not print, or there is a printing error.
The printer does not feed paper.
The LED indicator or the LCD is not lit.
Printed paper contains streaks or poor quality characters,
or paper is not fed correctly.
Mobile (Wi-Fi)
OK
Serial number
Problem
■ Is the cable loose?
Check that the cable is connected securely.
■ Is the roll installed correctly?
If not, remove the roll and reinstall.
■ Is there enough roll remaining?
If not, install a new roll.
■ Is the roll compartment cover open?
Check that the roll compartment cover is closed.
■ Has a print error or transmission error occurred?
Turn off the printer and on again. If the problem still occurs, contact your Brother dealer.
■ Is there dirt or lint on the roller preventing it from rolling freely? Clean the roller.
■ Check that the ejection path of the paper is not blocked.
■ Check that the roll is set correctly by removing the roll and installing it again.
■ Ensure that the roll compartment cover is closed correctly.
■ Is the battery inserted correctly?
Check that the battery is inserted correctly. If it is, check that the battery has sufficient charge remaining.
■ Is the adapter cord connected properly?
Check that the cord is connected correctly.
■ If the LED indicator or the LCD still does not light up, contact your Brother dealer.
■ Is the print head or roller dirty?
Although the print head generally remains clean under normal use, lint or dirt from the roller may become stuck on the printer head. If this occurs,
clean the roller.
Menu
OK
SER.NO.
Solution
OK
OK