Brother Wi-Fi Direct Manual - Halaman 17

Jelajahi secara online atau unduh pdf Manual untuk Perangkat lunak Brother Wi-Fi Direct. Brother Wi-Fi Direct 24 halaman.

Configuration methods

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), you can configure a Wi-Fi

Direct network by following these instructions.

Press

Press Wi-Fi Direct.

Swipe up or down, or press a or b to display Group Owner.

Press Group Owner and then press On.

Swipe up or down, or press a or b to display PIN Code.

Press PIN Code.

When Wi-Fi Direct On? is displayed, press On to accept.

To cancel, press Off.

When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate

your mobile device's WPS PIN configuration method (see your mobile device's user's guide for

instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.

To cancel, press

The machine will wait for a connection request from your mobile device. When PIN Code appears, input

the PIN displayed on your mobile device to the machine.

Press OK.

If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your

mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from

the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 16.