Fujitsu LifeBook T4210 Panduan Bios - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Bios untuk Tablet Fujitsu LifeBook T4210. Fujitsu LifeBook T4210 33 halaman. Lifebook t series

Halaman Cetak

L i f e B o o k T S e r i e s T a b l e t P C

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security

features of your tablet to fit your operating needs and to

view the current data security configuration. Follow the

instructions for Navigating Through the Setup Utility to

make any changes. (See Navigating through the Setup

Utility on page 2 for more information)

Entering a password incorrectly three times

in a row will cause the keyboard and

mouse to be locked out and the warning

[System Disabled] to be displayed. If

this happens, restart the computer by

turning off and on the power with the

power switch and use the correct

password on reboot. Note: Unless you

have previously enabled the power switch

in the BIOS, it will not be possible to turn

off the unit with the switch. This is

applicable for non-ACPI OS's.

Main

Supervisor Password Is:

User Password Is:

Set Supervisor Password

Set User Password

Minimum User Password Length:

Password on Boot:

On Automatic Wake up:

Boot from Removable Media:

Flash Write:

Hard Disk Security

Owner Information

Security Chip Setting

Security Panel On Resume:

Help

ESC

Exit

PhoenixBIOS Setup Utility

Advanced

Security

Boot

Clear

[Enter]

[0]

[Disabled]

[All]

[Enabled]

Select Item

-/Space

Select Menu

Enter

Figure 13. Security Menu

If you set a password, write it down and

■

keep it in a safe place. If you forget the

password you will have to contact your

support representative to regain access

to your secured functions and data.

■

If you make an error when re-entering

the password a [Warning] will be dis-

played on the screen. To try again press

the [Enter] key and then retype the pass-

word. Press the [Esc] key to abort the

password setting process.

■

If the Password on Boot is Disabled you

will not have to type your password

upon resuming the system from the

Standby or Hibernate modes.

The following tables show the names of the menu fields

for the Security menu and its submenus, the options for

each field, the default settings and a description of the

field's function and any special information needed to

help understand the field's use. The default condition is

no passwords required and no write protection.

Info

Exit

Item Specific Help

Press <Enter> key to

set Supervisor Password

to enable any password

features.

Then password entry is

required to enter BIOS

Setup.

Change Values

Setup Defaults

Select Sub-Menu

F10

Save and Exit