Fujitsu Point 510 Panduan Pengguna - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Tablet Fujitsu Point 510. Fujitsu Point 510 40 halaman. Pen tablet
Juga untuk Fujitsu Point 510: Referensi Produk (2 halaman)
Halaman Cetak
The following table shows how battery lights show battery status:
The green Charge Status light indicates the power source and charge status.
On continuously: Fast charge (0 to 89% of capacity)
Flashing:
Slow charge (90-99% of capacity). Flashes faster at 90%, slower at 99%.
One second on:
External power is attached.
is 100% charged, the light comes on for a few seconds, then turns off.
Off:
Battery is not being charged.
The amber Low Battery light indicates low battery conditions.
On continuously: Critically low battery.
Flashing quickly: 1/2 second on, 1/2 second off – very low battery.
One second on, one second off – low battery.
Very slow flash:
Flashing every 4 seconds – very low battery during Suspend mode
(flashing synchronized with the Power light).
Off:
Battery power is adequate, or external power is attached.
*
External power can come from an AC adapter, auto adapter, or a Point 510 cradle that supplies
power.
To charge the battery pack:
1. With the Point 510 pen tablet disconnected from external power sources, look at the
amber Low Battery light to determine the battery charge level. The lower the
battery level, the longer the battery pack will require for recharging.
2. Connect the Point 510 pen tablet to a power adapter or a Point 510 pen tablet
cradle that provides power. If the battery pack charge level is below 90% when
external power is initially connected, the green Charge Status light comes on and the
battery begins charging. When the Charge Status light turns off, the battery is
100% charged.
Note:
If battery power is less than 90% capacity when external power is attached (green
Charge Status light on continuously), the battery starts charging automatically until
100% charge is reached or external power is disconnected. If battery power is 90%
or more when external power is attached (Charge Status light flashes once), the
battery does not charge. Charging begins only when battery power is less than 90%
at the time that external power is connected, and from that point, charging proceeds
until 100% charge is reached or external power is disconnected.
As long as external power remains connected to the pen tablet, the charging process
continues until the battery pack reaches 100% charge.
*
When external power is attached and the battery
Charging the Battery Pack
2-9