Brother DCP-J132W Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai Brother DCP-J132W. Brother DCP-J132W 48 halaman. Dcp-j132w
Juga untuk Brother DCP-J132W: Panduan Pengguna (44 halaman), Panduan Memulai Cepat (31 halaman), Faqs (2 halaman)

Halaman Cetak

Windows

Operation

INSTALLING HARDWARE

Do not connect the scanner to your computer until instructed to do so by the driver installation software. When

instructed to do so, connect the scanner cable as shown below and follow the instructions.

After you have installed the software, follow the steps below. Then, proceed to Calibration.

Connect the USB cable to the scanner and to a USB port on your computer as shown below (either to a

desktop or laptop computer). If necessary, please check your computer's user guide to identify the USB

ports available and their locations.

The following message will be displayed, and the computer will automatically detect the new hardware

device installed and it will be ready for use.