Brother ImageCenter ADS-2000 Panduan Keamanan Produk - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Keamanan Produk untuk Pemindai Brother ImageCenter ADS-2000. Brother ImageCenter ADS-2000 20 halaman. High-speed desktop document scanner
Juga untuk Brother ImageCenter ADS-2000: Lembar Spesifikasi (2 halaman), Manual (16 halaman), Panduan Pengaturan Cepat (12 halaman), Spesifikasi Teknis (2 halaman), Panduan Keamanan Produk (18 halaman)
Halaman Cetak
Notice Regarding the Faithful Reproduction of
Scanned Documents
After scanning a document, confirm that the accuracy and quality of the corresponding scan data
meets your needs by confirming the size of the scan data, the amount of image data captured,
image fidelity, color tones, etc.
Always confirm the scan data before destroying the original document.
It is possible that a portion of the scan data may be lost or damaged, therefore, read all instructions
carefully and keep the following in mind.
Depending on the condition of the document, the document may become worn thin, distorted,
dirty, or cracked during scanning. In this case, some or all of the scan data may be lost.
Confirm that the document has no wrinkles, bends, or holes.
If the inside of the machine is dirty, the document may become worn thin, distorted, dirty, or
cracked during scanning. In this case, some or all of the scan data may be lost.
Clean the inside of the machine carefully and regularly.
The following may occur depending on the scan settings, such as document size, scanning
resolution, color-related settings, single-side or double-side scanning settings, auto deskew,
blank page skip, etc.
• Text may be illegible or unclear if image resolution is too low.
• Scan data of a color document may be captured in black-and-white.
• Only one side of a two-sided document may be captured.
• A portion of the document may not be scanned, or the size may be too small.
• The document may only be scanned up to a certain point, after which scan data will be lost.
• Blank pages may not be deleted, or pages may be deleted unnecessarily.
• Margins may be added to the edges of the scan data.
Refer to the User's Guide for information about how to configure the scan settings.
Depending on the condition of the document (such as if it has wrinkles, bends, or holes) and
consumables, multiple pages of a document may be fed at once, causing some pages to be
missing from the scanned data.
Confirm that the document has no wrinkles, bends, or holes.
Replace all consumables periodically.
When scanning documents that are not within the recommended guidelines, or depending on
the condition of the document (such as if it has wrinkles, bends, or holes), consumables, or the
paper feeding mechanisms inside the machine, documents may become jammed inside the
machine during scanning. In this case, some or all of the scan data may be lost. (Documents
may be destroyed as a result of a paper jam.)
Refer to "Acceptable Documents" in the User's Guide for information about acceptable
documents.
1
17