Fujitsu Stylistic Q552 Panduan Bios - Halaman 22
Jelajahi secara online atau unduh pdf Panduan Bios untuk Tablet Fujitsu Stylistic Q552. Fujitsu Stylistic Q552 25 halaman. Slate pc
Juga untuk Fujitsu Stylistic Q552: Panduan Memulai (15 halaman), Lembar data (2 halaman)
Halaman Cetak
S T Y L I S T I C Q 5 5 2 B I O S
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. (See
Navigating through the Setup Utility on page 2 for more
information.)
Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the CD-ROM is used, drive
allocations change automatically without changing the BIOS setup. If a floppy disk format is used, the CD-
ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not
present or disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is
present since the C: designator is always reserved for the hard drive.The boot sequence ignores the new drive
designations, but your application software will use the new designations.
Info
Boot Priority Order:
1:
Floppy Disk Drive
2:
Drive0 HDD:
3:
NETWORK:
4:
USB HDD:
5:
USB CD/DVD:
F1
ESC
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3. NETWORK
4: USB HDD:
5: USB CD/DVD:
22
Phoenix SecureCore(tm) Tiano Setup
System
Advanced
Security
Help
Select Item
/
Exit
Select Menu
/
Figure 16. Boot Device Priority Submenu
Description
The boot selections determine the order that the BIOS searches for the operating system during the
startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys
and then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a
device that is not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot
priority list. Be sure to save the changed order when you exit the BIOS utility by either going to the
Exit Menu and choosing Exit Saving Changes, or pressing F10 and choosing Yes to Save and Exit.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be over-
written, depending upon your operating environment.
The following table shows devices associated with
your tablet and the order in which they will be
searched for the boot device
Boot
Exit
-/Space
Change Values
Enter
Select ► Sub-Menu
.
Item Specific Help
Configures order of
Boot Device.
Keys used to view or
configure devices.
'' and '': Select a
device:
'+' and '-': Move the
device up or down.
'Shift + 1': Enables or
disables(!) a device.
F9
Setup Defaults
F10
Save and Exit