Fujitsu CREMSON MODULAR STARTERKIT Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Motherboard Fujitsu CREMSON MODULAR STARTERKIT. Fujitsu CREMSON MODULAR STARTERKIT 36 halaman.

Halaman Cetak

Fujitsu CREMSON MODULAR STARTERKIT Panduan Pengguna

7.2 Tool options for own projects

Valid load module files for different CPU boards can only be achieved if the language tool

configuration is appropriate. The most convenient way to create own projects is to copy the

provided Template-Projects from the sample-directory and use it as "blank sheet".

Always check the Linker Settings ("Project – Setup Project – Linker – Disposition") to make

sure the following memory map is applied according to your project configuration :

Recommended linker settings for MB91F369 CPU-Board for debugging

Memory Type

Data RAM,

F-Bus RAM

External Debug RAM

Note : Startup code must be located at 0x8F:4000 !

Table 3: Linker Settings for MB91F369 Debug-Configuration

Recommended linker settings for MB91F369 CPU-Board for embedded flash execution

Memory Type

Data RAM,

F-Bus RAM

Internal flash ROM

Note : Startup code must be located at 0x0F:4000 !

Table 4: Linker Settings for MB91F369 Flash-Configuration

Recommended linker settings for MB91F362 CPU-Board (embedded flash only)

Memory Type

Data RAM,

F-Bus RAM

Internal flash ROM

Note : Startup code must be located at 0x0F:4000 !

Table 5: Linker Settings for MB91F369 Debug-Configuration

Cremson Starterkit User Manual

Chapter 7 . Appendix

Used for

Area(s)

Variables,Stack,

3D000..3FFFF

Displaylist

40000..43FFF

Code

88:0000.. 8F:3FFF

Boot-Code

8F:4000..8F:FFFF

Used for

Area(s)

Variables,Stack,

3D000..3FFFF

Displaylist

40000..43FFF

Code

08:0000.. 0F:3FFF

Boot-Code

0F:4000..0F:FFFF

Used for

Area(s)

Variables,Stack,

3D000..3FFFF

Displaylist

40000..40FFF

Code

08:0000.. 0F:3FFF

Boot-Code

0F:4000..0F:FFFF

- 28 -

Sections

DATA, INIT, STACK,

(DISPLIST) = RAM_AREA

CODE = CODE_AREA

START,INIT,CONST

=ROM_AREA

Sections

DATA, INIT, STACK,

(DISPLIST) = RAM_AREA

CODE = CODE_AREA

START,INIT,CONST

=ROM_AREA

Sections

DATA, INIT, STACK,

(DISPLIST) = RAM_AREA

CODE = CODE_AREA

START,INIT,CONST

=ROM_AREA