Fujitsu D2530 Panduan Teknis - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D2530. Fujitsu D2530 35 halaman. For econel 200 s2
![Fujitsu D2530 Panduan Teknis](/uploads/products/server2/2463819/2463819.png)
Features
3.2
Main memory
The system board supports up to 8 Gbyte main memory. 4 slots (2 banks with
2 modules) are available for the main memory. Each memory bank can be
populated with 512 Mbyte, 1 Gbyte or 2 Gbyte FBD533/PC2-4200F Fully
Buffered DIMM memory modules.
ECC with memory scrubbing and with the Single Device Data Correction
(SDDC) function is supported.
I
You will find the descriptions how to install memory modules in the
Options Guide of your server.
Module population
Figure 2: Main memory
– If the memory modules are populated in pairs, each pair must consist of
identical memory modules (2-way interleaved mode)
– The module capacity between pairs can differ: pair 2A/2B can be populated
with two 512 Mbyte modules and pair 1A/1B with two 1 Gbyte modules.
Following table shows the mandatory population order:
single channel
dual channel
D2530 (Econel 200 S2)
DIMM 2B
DIMM 1B
DIMM 2A
DIMM 1A
DIMM 1A
DIMM 2A
populated
empty
populated
empty
populated
populated
Technical Manual
Main memory
DIMM 1B
DIMM 2B
empty
empty
populated
empty
populated
populated
15