Fujitsu D2532 Panduan Teknis - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D2532. Fujitsu D2532 45 halaman. For rx100 s4

SAS/IME configuration program

For the SAS version the system board is equipped with an eight channel SAS

controller 1068 from LSI Logic. The assignment of the SAS channels to the SAS

connectors on the system board is as follows:

– channels 0 are connected to connector SAS/SATA1.

– channels 1 are connected to connector SAS/SATA2.

You will find the exact location of the SAS connector in the schematic view of

the system board.

The BIOS of the onboard SAS controller includes a menu-driven SAS/IME

(Integrated Mirror Enhanced) configuration program. This program allows you

to change almost all of the option settings of the SAS controller.

When you boot the system a SAS-BIOS message listing the SAS devices

connected is displayed.

If a SAS-BIOS error message appears or problems arise with SAS

devices, please read the documentation of your SAS device.

If you are unable to trace or rectify the error, please contact your dealer

or our customer service centre.

Working with the keyboard

Use the following keys when running the program:

arrow keys

[+]/[-]

[ENTER]

[ESC]

[F2]

D2532 (RX100 S4)

to make selections

to change a selection

to accept a selection

to call the previous menu and to terminate the SAS configu-

ration program

to jump into the menu line. This function is not available in all

menus