Fujitsu D2861 Panduan Teknis - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D2861. Fujitsu D2861 40 halaman. System board for for bx922 s2
Halaman Cetak
Performance features
V
CAUTION!
If only one CPU is installed, the empty DIMM slots must be fitted with
dummy DIMM modules to ensure sufficient cooling of the system (this
does not apply if two CPUs are installed).
3.2.1
Memory speed
The maximum DDR3 memory speed depends on the memory configuration on
one memory channel and on the CPU speed.
One DIMM per channel = max. 1333 MHz, two DIMMs per channel = max.
1333 MHz for 1.5 V memory / max. 1066 MHz for 1.35 V memory. The memory
channel with the lowest speed defines the speed of all CPU channels in the
system.
RDIMM
1.5 V
1333 MHz
RDIMM
LV /1.35 V
1333 MHz
UDIMM 1.5 V
1333 MHz
UDIMM LV / 1.35 V
1333 MHz
* SR = single rank, DR = dual rank, QR = quad rank
** No memory modules released for this configuration
*** Lost LV-mode memory will automatically switch to 1,5 V Vcc
D2861 (BX922 S2)
2 / 2
1
800, 1066, 1333
2 / 2
1
800, 1066
2 / 2
2
800, 1066, 1333
2 / 2
2
800
2 / 2
1
800, 1066, 1333
2 / 2
1
800, 1066
2 / 2
2
800, 1066
2 / 2
2
800
2 / 2
1
800, 1066, 1333
2 / 2
2
800, 1066, 1333
2 / 2
1
800, 1066, 1333
2 / 2
2
800, 1066
Technical Manual
Main memory
SR / DR
QR
Mix of SR + DR
Mix of QR + SR /DR
SR / DR
QR**
Mix of SR + DR
Mix of QR** + SR /DR
SR / DR
Mix of SR + DR
SR / DR
Mix of SR + DR
29