Fujitsu D3030 Panduan Teknis - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D3030. Fujitsu D3030 38 halaman. System board for bx920 s2

Modules with Electrostatic-Sensitive Devices

Modules with electrostatic-sensitive devices are identified by the following

sticker:

Figure 1: ESD label

When you handle components fitted with ESDs, you must always observe the

following points:

Switch off the system and remove the power plugs from the power outlets

before installing or removing components with ESDs.

You must always discharge static build-up (e.g. by touching a grounded

object) before working with such components.

Any devices or tools that are used must be free of electrostatic charge.

Wear a suitable grounding cable that connects you to the external chassis of

the system unit.

Always hold components with ESDs at the edges or at the points marked

green (touch points).

Do not touch any connectors or conduction paths on an ESD.

Place all the components on a pad which is free of electrostatic charge.

For a detailed description of how to handle ESD components, see the

relevant European or international standards (EN 61340-5-1,

ANSI/ESD S20.20).

D3030 (BX920 S2)

Technical Manual

Notes on safety