Fujitsu D3034 Panduan Teknis - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D3034. Fujitsu D3034 34 halaman. System board for primergy rx100 s7

Features

3.5

Temperature / system monitoring

Temperature and system monitoring aim to reliably protect the computer

hardware against damage caused by overheating. In addition, any unnecessary

noise is also prevented by reducing the fan speed, and information is provided

about the system status.

The following functions are supported:

Temperature monitoring

Measurement of the processor and the system internal temperature by an

onboard temperature sensor, measurement of the ambient temperature by a

C temperature sensor, measurement of the memory temperatures by

integrated temperature sensors.

Fan monitoring

The power supply unit and system fans are monitored. Fans that are no longer

available, blocked or stuck fans are detected.

Fan control

The fans are regulated according to temperature.

Voltage monitoring

When voltage exceeds warning level high or falls below warning level low an

alert will be generated.

System Event Log (SEL)

All monitored events of the system board are signalized via the Global Error

LED or CSS LED and recorded in the System Event Log. They could be

retrieved in the BIOS Setup, iRMC S3's Web interface or via the ServerView

Operations Manager.

PRIMERGY Local Diagnostic LEDs (LDL)

Optical signaling through the LEDs on the system board identifies defective

modules and components (CSS functionality) as well as gaining information on

the PDA (Prefailure Detection and Analysis).

Technical Manual

D3034 (RX100 S7)