Fujitsu D3049 Panduan Teknis - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D3049. Fujitsu D3049 36 halaman. System board for primergy tx140 s1 / tx120 s3
Halaman Cetak
3.4
Screen resolution
Depending on the operating system used the screen resolutions in the following
table refer to the graphic controller on the system board. The graphic controller
is integrated in the iRMC S3 (integrated Remote Management Controller).
Screen resolution
(pixel)
640x480
800x600
1024x768
1152x864
1280x1024
1600x1200
If you are using an external graphic controller, you will find details of supported
screen resolutions in the Operating Manual or Technical Manual supplied with
the graphic controller.
3.5
Temperature / system monitoring
Temperature and system monitoring aim to reliably protect the computer
hardware against damage caused by overheating. In addition, any unnecessary
noise is also prevented by reducing the fan speed, and information is provided
about the system status.
The following functions are supported:
Temperature monitoring
Measurement of the processor and the system internal temperature by an
onboard temperature sensor, measurement of the ambient temperature by a
2
I
C temperature sensor.
Fan monitoring
The power supply unit and system fans are monitored. Fans that are no longer
available, blocked or stuck fans are detected.
TX140 S1 / TX120 S3
Maximum refresh
rate (Hz)
85
85
75
60
60
60
Technical Manual
Max. number of colours
32 bit
32 bit
32 bit
16 bit
24 bit
16 bit
Features
27