Fujitsu F2MC-8FX Series Panduan Pengoperasian - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Motherboard Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 20 halaman. 8-bit microcontroller
Juga untuk Fujitsu F2MC-8FX Series: Catatan Aplikasi (12 halaman), Catatan Aplikasi (23 halaman), Setup Manual (18 halaman), Setup Manual (19 halaman), Setup Manual (30 halaman), Catatan Aplikasi (20 halaman), Catatan Aplikasi (21 halaman), Panduan Pengoperasian (21 halaman), Setup Manual (23 halaman), Panduan Pengguna (24 halaman), Setup Manual (17 halaman)

Fujitsu F2MC-8FX Series Panduan Pengoperasian
■ Header board specifications
Figure 14 shows recommended dimensions of the header board connected to the MCU board.
Table 11 lists the general specifications of the header board.
Incorrect insertion
prevention guard
MCU board I/F
connector B
Figure 14 Recommended dimensions of the header board (Top view)
MCU board interface connector
Incorrect insertion prevention guard
Spacing between the MCU and header boards when engaged Approx. 5.0mm
■ Connector socket specifications
The specifications of a connector and a socket is shown in Table 12.
Header board interface connector Connects the MCU board to the header board.
BGM adapter connector
Main clock mounting socket
Sub clock mounting socket
12
2
1
120
119
30mm
40mm
Table 11 General specifications of the header board.
Item
Table 12 Connector and socket specifications
Item
20mm
13mm
2
1
120
119
120 pin 0.5mm pitch 2 piece connector (Straight) × 2
Model number: WR-120SB-VF-N1
(Japan Aviation Electronics Industry, Limited)
2 pin SIP socket
Model number: PCW-3-1-1PW (MAC EIGHT)
Connects the MCU board to the BGM adapter.
Mounts the main clock crystal oscillator.
Mounts the sub clock crystal oscillator.
MCU board I/F
connector A
Description
Description