Fujitsu F2MC-8FX Series Catatan Aplikasi - Halaman 7

Jelajahi secara online atau unduh pdf Catatan Aplikasi untuk Motherboard Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 12 halaman. 8-bit microcontroller
Juga untuk Fujitsu F2MC-8FX Series: Panduan Pengoperasian (20 halaman), Catatan Aplikasi (23 halaman), Setup Manual (18 halaman), Setup Manual (19 halaman), Setup Manual (30 halaman), Catatan Aplikasi (20 halaman), Catatan Aplikasi (21 halaman), Panduan Pengoperasian (21 halaman), Setup Manual (23 halaman), Panduan Pengguna (24 halaman), Setup Manual (17 halaman)

DBG pin operation V1.0

Chapter 4 Precautions in using DBG pin

4 Precautions in using DBG pin

1. The peripheral circuit connected to DBG pin shouldn't influence the 1-line UART

communication if using BGM Adapter to do debug. Please refer to figure 2-1 when design

user board.

2. It is recommended that set P12 as input pin or output low in user code when doing debug.

Do not set P12 to output high. Because if set P12 output high, DBG pin will output high when

target MCU runs in free-run mode. And if target board is connected with BGM adapter in this

condition, a large current will run through DBG pin when BGM adapter transports bit "0" with

1-line UART pin.

MCU-AN-500009-E-10 – Page 7