Fujitsu F2MC-8FX Series Setup Manual - Halaman 21

Jelajahi secara online atau unduh pdf Setup Manual untuk Motherboard Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 23 halaman. 8-bit microcontroller
Juga untuk Fujitsu F2MC-8FX Series: Panduan Pengoperasian (20 halaman), Catatan Aplikasi (12 halaman), Catatan Aplikasi (23 halaman), Setup Manual (18 halaman), Setup Manual (19 halaman), Setup Manual (30 halaman), Catatan Aplikasi (20 halaman), Catatan Aplikasi (21 halaman), Panduan Pengoperasian (21 halaman), Panduan Pengguna (24 halaman), Setup Manual (17 halaman)

Halaman Cetak
Fujitsu F2MC-8FX Series Setup Manual

4 Development Platform Quick Start

4.1 Tools Setup Sequence

Start the debugging system in the following sequence:
Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is green;
Connect an EV board to BGMA IF socket;
Turn on the EV board, confirm the LED on the BGMA is orange and the power LED on
the EV board is on.

4.2 Open Project and Start Debug

Users can start a debugging from PC software SOFTUNE workbench in the following
sequence.
Start the SOFTUNE by selecting Programs> SOFTUNE V3> FFMC-8L Family
SOFTUNE Workbench from Start menu;
Click Open workspace from File Menu in SOFTUNE;
Select MB95F334 Motor Drive V1.0.prj in Open Space window;
Click Start debug from Debug Menu.
If the entire procedure goes right, a debugging will start normally.
EV Board MB2146-440-E Setup Guide
Chapter 4 Development Platform Quick Start
Page 19