Fujitsu FSSDC-9B506-EVB Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Motherboard Fujitsu FSSDC-9B506-EVB. Fujitsu FSSDC-9B506-EVB 34 halaman. Fss mb9bf506r ev-board
Halaman Cetak
3 Flash On-Board Programming
There are two ways to program the on-chip Flash of MB9BF506 series MCU: UART On-
Board Programming and USB On-Board Programming.
3.1 On-Board Programming via UART
First check the hardware setting as introduced by section 2.3.
Install the UART programmer: PCWFM3_V01L01. (It can be downloaded on the web)
Open it, set the parameter as shown in following figure, and select Hex file.
Click Full Operation.
Press reset key in the board, and the programming will start.
Figure 3-1: UART Programmer Overview
Figure 3-2: Press Reset Button
Figure 3-3: Start Programming
10