Fujitsu MB91460 SERIES Catatan Aplikasi - Halaman 15
Jelajahi secara online atau unduh pdf Catatan Aplikasi untuk Motherboard Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 23 halaman. 32-bit microcontroller
Juga untuk Fujitsu MB91460 SERIES: Panduan Pengguna (45 halaman), Memulai (41 halaman), Catatan Aplikasi (26 halaman), Catatan Aplikasi (29 halaman), Catatan Aplikasi (29 halaman)
Halaman Cetak
3.2 EMU_SRAM_CS1_USB.sup
This debug configuration uses the external SRAM memory connected to CS1 area of the
microcontroller.
Please make sure the following setting on starterkit is done:
Table 7: Jumper and switches on SK91461 SRAM Emulation
Start the debug session by double-clicking on EMU_SRAM_CS1_USB.sup. CS1 area is
initialized for program download to SRAM via procedure file. After that, CS1 is configured for
program execution, MODR register and program counter are patched and the startup file is
executed up to main()-function. This is also done by procedure file and is necessary to
prevent any changes in startup file that could lead to malfunction of the debug session.
Take care not to overwrite settings for CS1 area in the startup file! Otherwise program
© Fujitsu Microelectronics Europe GmbH
MB91461 Emulation
Chapter 3 Evaluation system with MB91461R
Name (Switches)
RES
P15_3
P15_2
INT0
MD0
MD1
MD2
MD3
Name (Jumpers)
P21_0
P21_1
P15_3
P15_2
Attention:
execution from external SRAM does not work anymore.
- 15 -
Setting
ICE
Don't care
Don't care
Don't care
H
L
L
L
Setting
Don't care
Don't care
Don't care
Don't care
MCU-AN-300029-E-V1