Indesit WIXXL 146 Buklet Instruksi - Halaman 7

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Indesit WIXXL 146. Indesit WIXXL 146 12 halaman. Indesit washing machine instructions booklet

Halaman Cetak

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash

temperature (see Programme table on page 6).

The temperature can be lowered, or even set to cold

wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for

the programme selected.

The maximum spin speeds for each programme are as

follows:

Programmes

Maximum spin speed

Cotton

1400 r.p.m.

Synthetics

800 r.p.m.

Wool

600 r.p.m.

Silk

The spin speed can be lowered, or the spin cycle can

be excluded altogether by selecting the symbol

The washing machine will automatically prevent you

from selecting a spin speed higher than the maximum

speed for each programme.

Option

Effect

Delays the start of the

wash by up to 12

hours.

Delay Timer

For washing a smaller

load.

Mini Load

This option reduces

the amount of

creasing on fabrics,

making them easier

to iron.

Easy Iron

Increases the

efficiency of the rinse.

Extra Rinse

Options

To enable an option:

1. press the button corresponding to the desired

option, according to the table below.

2. the option is enabled when the corresponding

button is illuminated.

Note: The rapid flashing of the button indicates that

the corresponding option cannot be selected for the

programme set.

Comments

Press the button repeatedly until the LED corresponding

to the delay flashes.

The fifth time the button is pressed, the option will be

disabled.

N.B. Once you have pressed the Start/Reset button, the

delay can only be decreased if you wish to modify it.

In addition to reducing actual washing time, this option will

reduce water and energy consumption by up to 50%.

Note: You can reduce the amount of detergent you use

with this wash.

When this option is set, programmes 4, 5, 6, 7 and Rinse

cycle will end with the laundry left to soak (Anti-crease)

and the Rinse cycle phase LED

- to conclude the cycle, press the START/RESET button.

- to run the draining cycle alone, set the knob to the

relative symbol

and press the START/RESET button.

Recommended when the appliance has a full load or with

large quantities of detergent.

Enabled with

programmes

1, 2, 3, 4, 5

Rinse cycle

3, 4, 5, 6, 7,

will flash.

Rinse cycle

1, 2, 3, 4, 5,

8, 9, 10, 12, 13

Rinse cycle

All

8, 9, 10,