Indesit LFT 228 AUK Panduan Servis - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Servis untuk Mesin pencuci piring Indesit LFT 228 AUK. Indesit LFT 228 AUK 26 halaman.

DISCHARGING PIPE CONNECTION

Standhose

Ensure that the flexible discharging-pipe has not been introduced too deep inside the standhose. Should the discharging-pipe be

equipped with "support-flaps", ensure that they too be completely introduced into the standhose.

Above illustration: Recommended height of the standhose 500m (20")

This will prevent the hose from tipping-over during setting-up and use.

Donot place the standhose near to electric-sockets and ENSURE that it is uncoiled and is placed in the direction as shown in the

illstration above.

The standhose must be provided with a hole measuring at least 38mm (1 1/2"). It must be set up as illustrated above, be

provided with a syphon and must discharge into the discharging plumbing system. However, it MUST NOT be connected to the

discharging-hose connections of the water-basin.

FILLING UP BASIN SYSTEM

Regarding discharging plumbing-system under the basin:

Before connecting the flexible discharging-hose, it is recommended to get rid off any internal residuals in the hose which could

ILLUSTRATION: Tap-height 600mm min.

Secure discharge-hose using a Jubillee-type clip.

Service Manual

Manual LFT 228-320 - 321

give rise to hose blockages.

Edition

2007.10.15

Language

English