Indesit 7OIF 896K GP.A RU Panduan Petunjuk Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Oven Indesit 7OIF 896K GP.A RU. Indesit 7OIF 896K GP.A RU 24 halaman.

Halaman Cetak

Installation

! ! ! ! ! Before operating your new appliance please read

this instruction booklet carefully. It contains

important information concerning the safe operation,

installation and maintenance of the appliance.

! ! ! ! ! Please keep these operating instructions for future

reference. Pass them on to any new owners of the

appliance.

Positioning

! ! ! ! ! Keep packaging material out of the reach of

children.

It can become a choking or suffocation hazard. ( see

Precautions and tips ).

! ! ! ! ! The appliance must be installed by a qualified

professional in accordance with the instructions

provided. Incorrect installation may cause harm to

people and animals or may damage property.

Built-in appliance

Use a suitable cabinet to ensure that the appliance

functions properly.

• The panels adjacent to the oven must be made of

heat-resistant material.

• Cabinets with a veneer exterior must be

assembled with glues which can withstand

temperatures of up to 100°C.

• To install the oven under the counter ( see

diagram ) or in a kitchen unit, the cabinet must

have the following dimensions:

! ! ! ! ! The appliance must not come into contact with

electrical parts once it has been installed.

The indications for consumption given on the data

plate have been calculated for this type of

installation.

Ventilation

To ensure adequate ventilation is provided, the back

panel of the cabinet must be removed. It is

advisable to install the oven so that it rests on two

strips of wood, or on a completely flat surface with

an opening of at least 45 x 560 mm ( see diagrams ).

Centring and fixing

Position the 4 tabs on the side of the oven so that

they are aligned with the 4 holes on the outer frame.

Adjust the tabs in accordance with the thickness of

the cabinet side panel, as shown below:

20 mm thick: take off the

removable part of the tab ( see

diagram ).

18 mm thick: use the first

groove, which has already

been set in the factory ( see

diagram ).

16 mm thick: use the second

groove ( see diagram ).

Secure the appliance to the cabinet by opening the

oven door and inserting 4 screws into the 4 holes on

the outer frame.

! ! ! ! ! All parts which ensure the safe operation of the

appliance must not be removable without the aid of

a tool.