Indesit HOTPOINT LUCE DX1032CX Panduan Servis - Halaman 38
Jelajahi secara online atau unduh pdf Panduan Servis untuk Oven Indesit HOTPOINT LUCE DX1032CX. Indesit HOTPOINT LUCE DX1032CX 39 halaman. Built-in touch control electronic multifunction 60 cm double oven
Halaman Cetak
Indesit
Company
PROGRAMMING
Using EMIT
This appliance can be programmed via the EMIT, using a USB Lead (Part No. C00222800),
Hardware Key (Part No. C00115587) and the Memwriter software.
USB - Serial Cable
(different types exist)
NOTE: This version of the Hardware Key and Eeprom Writer programmes are only available
to Indesit Company Engineers.
Pre-programmed Eeproms and Service socket boards are available for repairs and spare parts.
PROGRAMMING (using Smart Card Reader / Card)
If the Main Module has been replaced during a repair the
board will require programming using the following
method.
1.
Do NOT connect the machine to electrical supply.
2. Insert the pre-programmed card into the Card
reader. Care must be taken at this point to ensure
the card is inserted correctly with the Chip on the
card facing the PCB of the Reader.
3. Insert the Reader and Card into module connection
port - see photo.
Service Manual UK
Black Hardware Key
A Hardware Key Pin is available
(order Part No. C00114723, Qty = 1)
Continued overleaf
38 of 39
Smart Card Reader and
Smart Card in use
English