Indesit KN3G60SA/U S Panduan Petunjuk Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Oven Indesit KN3G60SA/U S. Indesit KN3G60SA/U S 29 halaman. Cooker and oven

Halaman Cetak

Practical cooking advice

Cooking on several shelves simultaneously

If it is necessary to use two racks, use the FAN

ASSITED mode

suited to this type of cooking. We also recommend

that:

• Positions 1 and 5 are not used. This is because

excessive direct heat can burn temperature

sensitive foods.

• Positions 2 and 4 are used and that food that

requires more heat is placed on the rack in

position 2.

• When cooking foods that require different cooking

times and temperatures, set a temperature that is

halfway between the two recommended

temperatures ( see Oven cooking advice table )

and place the more delicate food on the rack in

position 4. Remove the food that requires a

shorter cooking time first.

• When cooking pizzas on several racks with the

temperature set to 220°C, the oven is preheated

for 15 minutes. Generally speaking, cooking on

the rack in position 4 takes longer: we

recommend that the pizza cooked on the lowest

rack position is removed first, followed by the

pizza cooked in position 4 a few minutes later.

• Place the dripping pan on the bottom and the rack

on top.

Electronic timer*

This function displays the time and works as a timer

which counts down to zero.

! All functions will be implemented approximately 7

seconds after they have been set.

Resetting the clock

After the appliance has been connected to the

power supply, or after a power cut, the clock display

will begin to blink, showing the figure: 0:00

v v v v v

• Press button

the exact time. Press and hold the buttons to

quicken the count upwards.

Any necessary modifications can be made by

repeating the above process.

Only available in certain models.

, as this is the only cooking mode

0:00

and then buttons

and

Timer feature

This function may be accessed by pressing the n n n n n

button, after which the display will show the symbol

n n n n n . Every time the + button is pressed it

corresponds to a time increase of 10 seconds, until

it reaches 99 minutes and 50 seconds. After this

point, each press of the button represents an

increase of one minute, up to a maximum of 10 hours.

Pressing the - button reduces the time.

After the time period has been set, the timer will

begin to count down. When the timer reaches zero,

the buzzer will sound (this may be stopped by

pressing any button).

The time may be displayed by pressing the

button, and the n n n n n symbol indicates that the timer

function has been set. After approximately 7 seconds,

the display will automatically revert to the timer.

Cancelling a time that has already been set

Press the - button until the display shows 0:00.

Adjusting the buzzer volume

After selecting and confirming the clock settings,

use the - button to adjust the volume of the alarm

buzzer.

Planning cooking with the electronic

programmer*

Setting the clock

After the appliance has been connected to the

power supply, or after a blackout, the display will

automatically reset to 0:00 and begin to blink. To set

the time:

1. Press the COOKING TIME button

COOKING END TIME

2. Within 4 seconds of having pressed these

buttons, set the exact time by pressing the + and -

buttons. The + button advances the hours and the -

to set

button decreases the hours.

Once the time has been set, the programmer

automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the

time has elapsed a buzzer sounds.

To set the timer proceed as follows:

1. press the TIMER button

v v v v v

0:00.

and the

simultaneously.

. The display shows: