Indesit EcoTime IDVL 75 B R.9 Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengering Indesit EcoTime IDVL 75 B R.9. Indesit EcoTime IDVL 75 B R.9 16 halaman.

Halaman Cetak

1. Programmes and Options

Care and maintenance

Disconnecting the power supply

! Disconnect the dryer when not in use or

during cleaning and maintenance operations.

Cleaning the fi lter after each cycle

The filter is a fundamental component of the

dryer: its function is to collect lint and fluff that

form during drying.

be seriously hampered: drying times beco-

mes longer and more energy is consumed.

Moreover, the dryer may become damaged.

Do not use the dryer unless the filter has been replaced in

its holder.

Checking the drum after each cycle

Rotate the drum manually to remove smaller items (handker-

chiefs) that could have been left inside the dryer.

Cleaning the drum

Avoid using abrasives, steel wool or stainless steel cleaning

agents to clean the drum.

A coloured film may appear on the stainless steel drum

surface: it may be caused by a combination of water and/or

Clean the filter once

drying is completed, by

rinsing it under running

water or cleaning it

with a vacuum cleaner.

Should the filter beco-

me clogged, the flow of

air inside the dryer will

The filter is located

behind of the dryer seal

(see Picture).

Removing the filter:

1. Pull the filter's plastic

handle upwards (see

Picture).

2. Clean the

fluff off the filter

and replace it

correctly. Ensu-

re that the filter

is pushed fully

home.

cleaning agents such as fabric conditioners. This coloured

film does not affect the dryer's performance.

Cleaning the tumble dryer

• The external metal and plastic parts and the rubber parts

can be cleaned with the aid of a damp cloth.

• Periodically check the vent hose and all other parts of the

venting system and remove any accumulations of fluff and

lint.

Do not use solvents or abrasives.

Have the dryer checked regularly by authorised technical

personnel in order to ensure that the electrical and mechani-

cal parts work safely (see Assistance).