AEG A62000GNW0 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku AEG A62000GNW0. AEG A62000GNW0 20 halaman.

Installation

WARNING!

This appliance must be earthed.

The manufacturer declines any liability should these safety measures not be observed.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow:

Brown:

Blue:

As the colours of the wires in the mains lead of this appliance may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

1. Connect the wire coloured green and yellow to the terminal marked either with the let-

ter "E" or by the earth symbol

2. Connect the wire coloured blue to the terminal either marked with the letter "N" or

coloured black.

3. Connect the wire coloured brown to the terminal either marked with the "L" or col-

oured red.

4. Check that no cut, or stray strands of wire is present and the cord clamp

over the outer sheath.

5. Make sure the electricity supply voltage is the same as that indicated on the appliance

rating plate.

6. Switch on the appliance.

The appliance is supplied with a 13 amp plug fitted

the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

or coloured green and yellow.

Earth

Live

Neutral

. In the event of having to change

is secure