2N Lift8 Panduan Singkat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Singkat untuk Unit Kontrol 2N Lift8. 2N Lift8 13 halaman. Io module
Juga untuk 2N Lift8: Panduan Singkat (8 halaman), Panduan Singkat (12 halaman), Panduan Singkat (14 halaman), Panduan Singkat (6 halaman), Panduan Singkat (12 halaman), Panduan Singkat (17 halaman)

Mounting Completion

Having connected all the wires, check the bushings if used for proper tightening.

Replace the front cover carefully. Make sure that the wire arrangement inside the device

provides enough space for front panel insertion. Tighten the 4 screws thoroughly to push the

panel by 1 mm further to the metal chassis. Use the Torx 20 spanner for tightening, for

example.

Caution

An improper mounting may result in the audio unit not being waterproof. Water leakage

may damage the electronics.

2N® Lift8 Shaft Antivandal

them, never use other screws to avoid corrosion and screw appearance deterioration!

is assembled with stainless steel screws. If you lose