AEG a81000tnx1 Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku AEG a81000tnx1. AEG a81000tnx1 20 halaman.
Halaman Cetak10
www.aeg.com
Problem
The appliance is noisy.
Audible or visual alarm is on. The cabinet has been re-
The compressor operates
continually.
There is too much frost and
ice.
Water flows on the floor.
Temperature cannot be set.
Possible cause
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not suppor-
ted properly.
cently switched on.
The temperature in the ap-
pliance is too high.
Temperature is set incorrect-
ly.
Many food products to be
frozen were put in at the
same time.
The room temperature is too
high.
Food products placed in the
appliance were too warm.
The door is not closed cor-
rectly.
The FROSTMATIC function
is switched on.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Food products are not wrap-
ped properly.
The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Solution
Connect the mains plug to
the mains socket correctly.
Connect a different electrical
appliance to the mains sock-
et. Contact a qualified elec-
trician.
Check if the appliance
stands stable.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
Refer to "Operation" chap-
ter.
Wait a few hours and then
check the temperature
again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature before
storing.
Refer to "Closing the door".
Refer to "FROSTMATIC
function".
Refer to "Closing the door".
Wrap the food products bet-
ter.
Attach the melting water
outlet to the evaporative
tray.