AEG A83400HLW0 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku AEG A83400HLW0. AEG A83400HLW0 20 halaman.
Juga untuk AEG A83400HLW0: Panduan Pengguna (20 halaman)

Halaman Cetak

www.aeg.com

2. Press the temperature regulation

button again to change the

temperature.

3. Press the OK button to confirm.

The temperature indicator shows the set

temperature.

The set temperature will be reached

within 24 hours.

After a long period of non-operation it is

not necessary to set the temperature

again because it remains stored.

4.6 High temperature alarm

An increase in the temperature (for

example due to a power failure) is

indicated by flashing of the alarm and

temperature indicators, and sounding of

the buzzer.

The highest temperature reached in the

compartment appears on the indicator

for a few seconds. Then the display

shows the set temperature again.

The alarm indicator continues to flash

until normal conditions are restored.

To reset the alarm press OK button. The

buzzer will switch off.

4.7 FROSTMATIC function

The FROSTMATIC function accelerates

the freezing of fresh food and, at the

same time, protects foodstuffs already

stored from undesirable warming.

Activate the FROSTMATIC function at

least 24 hours before placing the food to

be frozen in the freezer compartment.

1. To activate the FROSTMATIC

function, press the Mode button

(several times if necessary) until the

corresponding icon appears

2. Confirm the choice by pressing the

OK button within few seconds.

You will hear the buzzer and the

remain on the display.

This function stops automatically after 52

hours.

It is possible to deactivate the function at

any time by pressing the Mode button

until the corresponding icon will flash

and then the OK button.

4.8 ChildLock function

1. The Child Lock function is activated

by pressing the Mode button (several

times if necessary).

The corresponding icon appears

2. Confirm the choice by pressing the

OK button within a few seconds.

You will hear the buzzer and the icon

remains lighted. In this condition any

possible operation through the keys

does not cause any change as long as

this function is activated.

It is possible to de-activate the function

at any time by pressing the Mode button

until the corresponding icon will flash

and then the OK button.

4.9 DrinksChill function

The DrinksChill function is to be used as

a safety warning when placing bottles in

the freezer compartment.

1. Activate by pressing the Mode

button (several times if necessary)

until the corresponding icon appears

2. Confirm the choice by pressing the

OK button within a few seconds.

You will hear the buzzer and the icon

appears.

3. Press the Temperature regulation

button to change the timer value

from default 30 min.

The timer can be changed from 1 to

90 min.

At the end of the selected time there are

the following indications:

• on the indicator

flashing;

• the icon

• sounding of an acoustic alarm until

the OK button is pressed.

will

At this point bear in mind to remove the

drinks contained in the freezer

compartment.

It is possible to deactivate the function at

any time by pressing the Mode button

until the corresponding icon will flash

and then the OK button.

the symbol

flashing;