AEG AGN81400C0 Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku AEG AGN81400C0. AEG AGN81400C0 48 halaman.

Halaman Cetak

www.aeg.com

Problem

If the advice does not lead

to the desired result, call the

nearest Authorized Service

Centre.

8.2 Closing the door

1. Clean the door gaskets.

9. INSTALLATION

WARNING!

Refer to Safety chapters.

9.1 Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

9.2 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Possible cause

There is no cold air circula-

tion in the appliance.

Ambient temperature

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Solution

Make sure that there is cold

air circulation in the appli-

ance.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only

be guaranteed within the

specified temperature

range. If you have any

doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

9.3 Ventilation requirements

The airflow behind the appliance must

be sufficient.

min.

5 cm

200 cm

min.

200 cm