A-Neuvideo ANI-PiP-41UHD Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Beralih A-Neuvideo ANI-PiP-41UHD. A-Neuvideo ANI-PiP-41UHD 20 halaman. 4x1 4k60 uhd seamless multiviewer video switcher

Halaman Cetak

OPERATION CONTROLS & FUNCTIONS

Front Panel

q POWER BUTTON:

second to enter the standby mode.

w POWER LED:

when on standby.

e INPUT 1-4 LEDS:

to an active source device, the corresponding green LED will be on.

Note: Only the LED of the selected input channel will light in green on single screen

display mode; all LEDs will light in green on multiview mode.

r AUTO LED:

When the device is in AUTO mode, the AUTO LED will light green, and a

HDMI is automatically identified. When the current displayed source signal is disconnected,

the switcher will automatically identify the next connected HDMI input port.

t IR WINDOW:

y AUTO BUTTON:

mode.

u INPUT BUTTON:

i MULTIVIEW BUTTON:

• Press this button to circularly select: SINGLE - PIP - PBP (1) - PBP (2) - Triple (1) -

Triple (2) - Quad (1) - Quad (2).

• Hold down this button for 3 seconds to select the aspect ratio for PBP (1) / PBP (2) /

Triple (1) / Triple (2) / Quad (1) / Quad (2).

o RES BUTTON:

• Press the RES button to circularly switch the output resolution of the HDMI OUTPUT port

(Please refer to the output resolution list of "8. Video & Audio").

• Hold down the RES button for 3 seconds to switch the output resolution to 720P60.

Press this button to power on the device. Hold down this button for 1

The Power LED will light green when the product is powered on, and red

Input signal indicator lights. When the HD 1/2/3/4 ports are connected

IR signal receving window.

Automatic button, only available on a single screen AUTO display

Input source button, only available on single screen display mode.

Multiview display mode button.

Output resolution switching button.