AEG ARCTIS Panduan Petunjuk Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pembeku AEG ARCTIS. AEG ARCTIS 28 halaman. Built-in fridge-freezers
Juga untuk AEG ARCTIS: Panduan Petunjuk Pengoperasian (32 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Panduan Petunjuk Pengoperasian (40 halaman), Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Pengoperasian (36 halaman), Panduan Petunjuk Pengoperasian (36 halaman), Panduan Petunjuk Pengoperasian (26 halaman), Petunjuk Pengoperasian & Panduan Pemasangan (28 halaman), Panduan Petunjuk Pengoperasian (36 halaman), Panduan Petunjuk Pengoperasian (27 halaman), Panduan Petunjuk Pengoperasian (34 halaman), Panduan Pengguna (24 halaman), Panduan Petunjuk Instalasi (11 halaman), Panduan Petunjuk Pengoperasian (29 halaman), Panduan Petunjuk Pengoperasian (23 halaman), Panduan Petunjuk Instalasi (25 halaman), Panduan Petunjuk Instalasi (24 halaman)

AEG ARCTIS Panduan Petunjuk Pengoperasian

Control and Information System

The control and information system comprises a temperature display,
an optical warning light and an acoustic warning device.
The system warns:
– if the temperature in the freezer compartment is too warm;
– if there is a malfunction in the appliance.

Temperature Warning

The red warning light flashes and a warning tone sounds as soon as
the temperature in the freezer compartment is warmer than -12°C.
Such a temperature increase is probably due to:
– frequent or extended opening of the door;
– storing large quantities of warm food;
– a fault in the appliance.
The warning tone can be switched off using the WARNING OFF button.
The warning light and warning tone switch off automatically when the
ACTUAL temperature in the freezer compartment drops again and
returns to the range of the display.
Note:
The warning tone switches off:
- after the initial start up when the internal temperature of -18°C has
been reached;
- by pressing on the Frostmatic button.

Malfunctions

If the electronics in the appliance have detected a fault that prevents
the ACTUAL temperature being measured, all the lights in the tempera-
ture display will flash. The appliance will continue to function using a
backup program until customer service has repaired the appliance.
62