A-Neuvideo HD-44G Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Beralih A-Neuvideo HD-44G. A-Neuvideo HD-44G 20 halaman. Ethernet (tcp) set up
Juga untuk A-Neuvideo HD-44G: Buku Petunjuk (20 halaman), Buku Petunjuk (6 halaman)

Halaman Cetak

REAR PANEL

DC POWER INLET

The Switcher is ﬁ tted with a DC power plug input connector. Ensure

that the used is of an approved type and is of sufﬁ cient current

carrying connector capacity with the correct voltage and connector

polarity. 12Volt DC power supply 3A Max (Center pin positive).

IR EXTENDER CONTROL

Support one of IR Extender. Extend distance maximum 300

Meters / ~984 feet. When you plug the External IR extender into

the switcher, the front panel IR receiver remain active.

RS-232 CONNECTION

RS-232 control port to allow for interfacing to a PC a computer

or touch panel control, to the switcher via this DB-9pin Female

connector for serial RS-232 control.

INPUTS- 1,2,3, & 4 HDMI

Connect a signal link of HDMI direct digital video/audio to this

Female HDMI connector. This connector supports HDMI digital

video/audio and DVI digital video sources.

HDMI Digital Video/Audio, Connector with ﬁ x screw

Input 1 ~ Input 4

OUTPUTS- 1,2,3,& 4 HDMI

Connect a signal link of HDMI direct digital video/audio to this

Female HDMI connector. This connector supports HDMI digital

video/audio and DVI digital video sources.

HDMI Digital Video/Audio, Connector with ﬁ x screw

Output 1 ~ Output 4

REAR PANEL

Power Jack:

DC Jack - Inner OD ᴓ 2.1mm (+ )

Outside OD ᴓ 5.5mm (GND)

Power input - 12VDC, 3A

IR Extender Jack:

Female Jack - inner OD ᴓ 3.5 mm

Remote port :

D-SUB-9pin Female connector

HDMI Digital Video/Audio Connector:

HDMI Female connector.

Note: With the proper adapters, the

switcher can be used with DVI digital video

signals HDCP compliant. DVI does not

support audio.