AEG OKO-ARCTIS Panduan Petunjuk Pengoperasian - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pembeku AEG OKO-ARCTIS. AEG OKO-ARCTIS 22 halaman. Table top freezer
Juga untuk AEG OKO-ARCTIS: Panduan Petunjuk Pengoperasian (24 halaman)

Halaman Cetak

Malfunction

The freezer temperature is

not sufficient, red light

lights up, temperature

alarm signal sounds.

Heavy build up of frost,

possibly also on the door

seal.

Unusual noises.

The compressor does not

start immediately after

changing the temperature

setting.

Important: regularly check on the red temperature pilot lamp and

thermometer that the storage temperature is being mantained.

Possible Cause

Temperature is not pro-

perly adjusted.

Door was opened for an

extended period.

A large quantity of warm

food was placed in the

appliance within the last

24 hours.

The appliance is near a

heat source.

Disturbance on the appli-

ance.

Door seal is not air tight

(possibly after changing

over the hinges).

Appliance is not level.

The appliance is touching

the wall or other objects.

A component, e.g. a pipe,

on the rer of the appliance

is touching another part of

the appliance or the wall.

This is normal, no error has

occurred.

Remedy

Please look in the "Initial

Start Up" section.

Open the door only as long

as necessary. Press the fast

freeze switch.

Press the fast freeze

switch.

Please, look in the

"Installation Location" sec-

tion.

Switch on the fast freeze

switch, keep the freezer

closed, inform your custo-

mer service.

Carefully warm the leaking

sections of the door seal

with a hair dryer (not hot-

ter than approx. 50°C). At

the same time shape the

warmed door seal by hand

such that it sits correctly.

Readjust the feet.

Move the appliance slight-

ly.

If necessary, carefully bend

the component out of the

way.

The compressor starts after

a period of time.