AEG OKO-ARCTIS 204-4 GS Buklet Instruksi - Halaman 4
Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Pembeku AEG OKO-ARCTIS 204-4 GS. AEG OKO-ARCTIS 204-4 GS 11 halaman.
Juga untuk AEG OKO-ARCTIS 204-4 GS: Buklet Instruksi (12 halaman)
Halaman Cetak
Location
Place the appliance as far away as possible from
sources of heat, e.g. radiators, heaters, direct sunlight,
etc. Best performance is obtained with ambient
temperature between +18 C and +43 C (class T);
+18 C and +38 C (class ST); +16 C and +32 C (class
N); +10 C and +32 C (class SN).
The class of your appliance is shown on its rating
plate.
For safety reasons, minimum ventilation must be as
shown in Fig. 1:
Appliance positioned under overhanging kitchen wall
units (see Fig. 1-A).
Appliance positioned without overhanging kitchen
units (see Fig. 1-B).
Attention: keep ventilation openings clear of
obstruction.
One or more adjustable feet mounted on the base of
the appliance make it possible to set it perfectly level.
Rear spacers
In the bag with the documentation, there are two
spacers which must be fitted as shown in the
figure.
Slacken the screws and insert the spacer under the
screw head, then re-tighten the screws.
The technical data is indicated in the rating plate on
the left side inside the appliance.
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by 6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
INSTALLATION
TECHNICAL SPECIFICATION
If this appliance – equipped with magnetic door seals
– replaces an older appliance featuring a spring lock
(mechanical latch) on the door or lid, please ensure
that this lock is made completely unusable before
«throwing out» the old appliance. This will prevent it
from becoming a death-trap for a child.
A
B
NP007
PR153
GB
Fig. 1
Fig. 1a
GB
37