AEG SANTO 3790-6 KG Panduan Petunjuk Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pembeku AEG SANTO 3790-6 KG. AEG SANTO 3790-6 KG 36 halaman. Refrigerator/freezer combination

Halaman Cetak

Reversing The Door

5. Transfer the self-closing system:

Unscrew the self-closing system on the right of the freezer door and

screw it onto the opposite side of the freezer door.

Unscrew the self-closing system on the right of the fridge door and

screw it onto the opposite side of the fridge door.

6. Fit the freezer door into the lower door bearing bolt and insert the cen-

tre door bearing above into the freezer door.

7. Insert the fridge door into the upper door bearing bolt. Pull both doors

forwards until the centre door bearing can be inserted below into the

fridge door.

8. Position the doors and centre door bearing against the housing and

screw the centre door bearing tight with each door open.

9. Fit the plinth cover with the freezer door open. To do this insert the

two lower fins of the plinth cover in the housing and press the base-

mask against the housing until the upper catches of the plinth cover snap

into position in the housing. To do this, press the catches downwards.

After changing the door hinges, check that the magnetic seals on the

doors fit perfectly against the housing and that the interior lighting

goes off when the door is closed.

10. Depending on the model:

Model with bar handle

Unscrew the top handle bracket

from the handle rod (1). Unscrew

the bottom handle bracket from

the door (2).

Unscrew the top handle bracket

from the door (3) and screw onto

the bottom right-hand side of the

door (4).

Caution! Do not overtighten the

screws (max. 2 Nm) as you may

damage the door handles.

Turn the handle bracket with the

handle rod 180° and screw them

to the door (5) and the fitted

handle bracket (6).

Caution! Do not overtighten the

screws (max. 2 Nm) as you may

damage the door handles.