AEG 222 D Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kap Ventilasi AEG 222 D. AEG 222 D 20 halaman. Fume extractor hood
Juga untuk AEG 222 D: Panduan Petunjuk Pemasangan dan Pengoperasian (20 halaman), Panduan Petunjuk Pemasangan dan Pengoperasian (20 halaman), Panduan Petunjuk Pemasangan dan Pengoperasian (20 halaman), Panduan Petunjuk Pemasangan dan Pengoperasian (20 halaman)

Removing the filter

Open the grid and remove the stops M to take out the filter. See

Fig. 7.

Carbon filter

• The activated carbon filter should only be used if you want to use

the hood in its filtering function.

• To do this you will need an original AEG activated carbon filter

(see special accessories).

• This filter cannot be cleaned or reused.

• As a general rule, the activated carbon filter should be

changed once every four months.

• Mounting - Fig 8

a. Fit first rearwards on the proper seats.

b. Then fix frontwards the carbon filter using hooks C.

• Dismounting :

Unhook the carbon filter from its housing pushing hooks C.

□

• Always specify the hood model code number and serial number

when ordering replacement filters. This information is shown on

the registration plate located on the inside of the unit.

• The activated carbon filter can be ordered from the AEG Service

Force.