AEG 240 D Petunjuk Pengoperasian dan Pemasangan - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi AEG 240 D. AEG 240 D 22 halaman.

Hood Operation

• The control panel is located on the front of the hood.

The control panel numbers and symbols (Fig. 6 from left to right)

are explained in the key below:

= Lighting, on/off.

= Fan switch (speeds 1-3).

= Fan timer, 15 minutes.

min

= Display showing fan speed (1-3), high speed (P), change

grease filters (F) and change activated carbon filters (C).

= Decrease fan speed button for reducing speed of motor

from high speed (P) down to speed 1.

= Increase fan speed button for increasing speed of motor

from 1 to 9 and high speed (P).

• If the hood fails to operate correctly, briefly disconnect it from the

mains power supply for almost 5 sec. by pulling out the plug. Then

plug it in again and try once more before contacting the Technical

Assistance Service.

Always press the

mains supply.

min

key before disconnecting the hood from the