A-Neuvideo HD-44G Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengalih Matriks A-Neuvideo HD-44G. A-Neuvideo HD-44G 20 halaman. Ethernet (tcp) set up
Juga untuk A-Neuvideo HD-44G: Buku Petunjuk (20 halaman), Buku Petunjuk (6 halaman)

A-Neuvideo HD-44G Buku Petunjuk

FRONT PANEL

1
POWER SWITCH
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power.
The Switcher will remember that last state during a power cycle.
When power is removed and resorted, the last confi guration will be evoked.
2
INPUT STATUS DISPLAY
Input sources 1 to 4 LCM illuminates blue to indicate that a video source is present on that input.
3
OUTPUT STATUS DISPLAY
Each Output (destination) Channel shows which input (source) is assigned.
4
DESTINATION SELECT BUTTONS
Separate outputs 1 thru 4 select buttons are provided for each destination assignment. Routing can be Source to Destination or one
source to multiple destinations. Example : Press Destination 1,2,4 then press Source 2 will route Input 2 to Output 1,2,4 respectfully.
5
EDID MODE SELECT BUTTONS
Used to select EDID mode using Input buttons #1 and #2.
6
IR SENSOR
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
7
SOURCE SELECT BUTTONS
Separate inputs 1 thru 4 select buttons are provided each source selection.
8
FUNCTION KEY - ALL
Disables (mute) video on all destinations OR Selects the same source to all destinations.
Option 1
- Press ALL followed by OFF button. The display will show " 0 " indicating all destinations have no video selected.
Option 2
- Press ALL followed by Source 1 thru 4. The display will show the Source selected.
- Press ENTER The pre-set source selection will be assigned all destinations.
FRONT PANEL
3