A-Neuvideo ANI-0108POE Buku Petunjuk - Halaman 8
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanjang A-Neuvideo ANI-0108POE. A-Neuvideo ANI-0108POE 12 halaman. Hdmi poe 1x8 splitter over cat5e/6 extender
Juga untuk A-Neuvideo ANI-0108POE: Buku Petunjuk (12 halaman)
Halaman Cetak
A
NEUVIDEO
RX Equalizer distance adjust
If you see a flickering or blinking image on the display, adjust the EQ switch to improve the cable skew. MAX stands for the strongest
HDMI signal level for the longest possible transmission length. MIN stands for the weakest HDMI signal level for short transmission length.
Adjust the signal level from MIN to MAX until the desired video quality is displayed. Adjustments can be made with the system installed
and powered on.
Recommended EQ settings
EDID TABLE:
CABLE LENGTH
EQ settings are Output port specific and do not transfer to other Output ports.
If you have good video/audio signal on one Output port and decide to move the CAT cable to a different Output port, you may have to
repeat the EQ setup procedure.
If you change CAT cables or change receivers, you may need to repeat the EQ setup procedure
(Cable distances are approximate)
6
RX EQUALIZER
.