A-Neuvideo ANI-FIBER-F02P Buku Petunjuk - Halaman 7
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanjang A-Neuvideo ANI-FIBER-F02P. A-Neuvideo ANI-FIBER-F02P 12 halaman. 4k fiber optic hdmi extender - 3300 ft/1000m - 4k@60hz w/ir, rs-232, hdmi 2.0 support
Halaman CetakOPERATION CONTROLS AND FUNCTIONS
Transmitter Panel
q POWER LED:
The power indicator is always on when the Receiver is powered on.
w FIBER LED:
The optical fiber connection indicator is always on when the Transmitter and Receiver
establish a normal optical fiber signal connection.
e HDMI LED:
IN: The HDMI signal input indicator is always on when there is signal input on the HDMI IN port.
LOOP: The HDMI loop output indicator is always on when the HDMI OUT port of the Transmitter
outputs signals to the HDMI display device.
r IR IN:
Connect to IR Receiver cable. The IR signal will send to the IR OUT port of the Receiver.
t IR OUT:
Connect to IR Blaster cable. The IR signal is from the IR IN port of the Receiver.
y AUDIO SWITCH:
video signals input, audio signals can be transmitted separately.
u EDID DIP SWITCH:
11: Copy RX HDMI OUT
10: Copy TX HDMI LOOP OUT
01: 4K60_2CH
00: 1080P_2CH
i SERVICE PORT:
o DC 5V:
DC 5V/1A power supply port
a FIBER:
Connect the Transmitter optical fiber module, and transmit signals to the Receiver via an
optical fiber cable.
s HDMI OUT:
HDMI video loop output port, connect to HDMI display device such as TV or Projector
with an HDMI cable.
Switch to select audio signal source (HDMI IN or LINE IN). When there is no
Dial the switch to set EDID.
Firmware update port.
5