A-Neuvideo ANI-315XLT Buku Petunjuk - Halaman 5
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Penerima A-Neuvideo ANI-315XLT. A-Neuvideo ANI-315XLT 8 halaman.
Halaman Cetak
A
NEUVIDEO
Transmitter Front & BACK Panels
q
w
IR OUT/BLASTER:
Connects to the supplied IR blaster for IR signal transmission to the source equipment. Place the IR blaster in
q
direct line-of-sight of the equipment to be controlled.
HDMI IN:
Connects to the HDMI input source devices such as a DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable.
w
RS-232 IN:
Connects the 3.5mm mini-jack to D-Sub 9-pin female adaptor cable (included in the package) to a PC or laptop for the
e
transmission of RS-232 commands.
DC 5V:
Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.
r
CAT5e/6 OUT:
Connects to the receiver unit with a single CAT5e/6 cable for transmission of all data signals.
t
Receiver Front & BACK Panels
q
w
DC 5V:
Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.
q
CAT5e/6 IN:
Connects to the transmitter unit with a single CAT5e/6 cable for transmission of all data signals.
w
IR IN/Extender:
Connects to the supplied IR extender cable for IR signal reception. Ensure that remote being used is within the direct
e
line-of-sight of the IR extender.
HDMI OUT:
Connects to a HDMI equipped TV/monitor for display of the HDMI input source signal.
r
RS-232 OUT:
Connects the 3.5mm mini-jack to D-Sub 9-pin male adaptor cable (included in the package) to a PC or control system
t
with D-Sub 9-pin cable for the transmission of RS-232 commands.
e
r
e
OPERATION CONTROLS & FUNCTIONS
t
r
t
3