A-Neuvideo ANI-2PIP-LOGO Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Monitor A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 15 halaman. 2x1 hdmi multiviewer
Juga untuk A-Neuvideo ANI-2PIP-LOGO: Buku Petunjuk (20 halaman)

Halaman Cetak
A-Neuvideo ANI-2PIP-LOGO Buku Petunjuk
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
GET CHROMAKEY N1
Show the current key range set for the selected color
RANGE 8
component.
Available values for N1:
RED
GREEN [Green component]
BLUE
Set the horizontal position of the upper-left corner of input
SET IN N1 HPOSITION N2 8
N1's window in pixels. The maximum position value is the
current horizontal resolution minus 1.
N1 = 1 ~ 2
N2 = 0 ~ {Resolution-1}
NOTE: Only available in dual-windowing modes.
GET IN N1 HPOSITION 8
Show the current horizontal position of the upper-left corner
of input N1's window in pixels.
N1 = 1 ~ 2
SET IN N1 VPOSITION N2 8
Set the vertical position of the upper-left corner of input N1's
window in pixels. The maximum position value is the current
vertical resolution minus 1.
N1 = 1 ~ 2
N2 = 0 ~ {Resolution-1}
NOTE: Only available in dual-windowing modes.
GET IN N1 VPOSITION 8
Show the current vertical position of the upper-left corner of
input N1's window in pixels.
N1 = 1 ~ 2
SET IN N1 WIDTH N2 8
Set the horizontal size of input N1's window in pixels. The
maximum value is the current horizontal resolution.
N1 = 1 ~ 2
N2 = 0 ~ {Resolution}
NOTE: Only available in dual-windowing modes.
GET IN N1 WIDTH 8
Show the current horizontal size of input N1's window in pixels.
N1 = 1 ~ 2
SET IN N1 HEIGHT N2 8
Set the vertical size of input N1's window in pixels. The
maximum value is the current vertical resolution.
N1 = 1 ~ 2
N2 = 0 ~ {Resolution}
NOTE: Only available in dual-windowing modes.
[Red component]
[Blue component]
[Input port]
[Horizontal position]
[Input port]
[Input port]
[Vertical position]
[Input port]
[Input port]
[Horizontal size]
[Input port]
[Input port]
[Vertical size]
14
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
GET IN N1 HEIGHT 8
Show the current vertical size of input N1's window in pixels.
N1 = 1 ~ 2
SET IN N1 UP-SIDE DOWN
Enable or disable the vertical flip function for input N1.
N2 8
N1 = 1 ~ 2
Available values for N2:
ON
OFF
GET IN N1 UP-SIDE DOWN 8
Show the current vertical flip state for input N1.
N1 = 1 ~ 2
SET IN N1 FLIP N2 8
Enable or disable the horizontal flip function for input N1.
N1 = 1 ~ 2
Available values for N2:
ON
OFF
GET IN N1 FLIP 8
Show the current horizontal flip state for input N1.
N1 = 1 ~ 2
SET IN N1 IMAGE STILL N2 8
Enable or disable the video freeze function for input N1.
N1 = 1 ~ 2
Available values for N2:
ON
OFF
GET IN N1 IMAGE STILL8
Show the current video freeze state for input N1.
N1 = 1 ~ 2
SET IN N1 BACKDROP
Set the free run color for input N1.
COLOR N2 8
N1 = 1 ~ 2
Available values for N2:
BLACK [Black color]
BLUE
GET IN N1 BACKDROP
Show the currently set free run color for input N1.
COLOR 8
N1 = 1 ~ 2
SET OUT A OSD INFO
Set the OSD display timeout length, or disable the timeout.
TIMEOUT N1 8
N1 = 0 ~ 100
GET OUT A OSD INFO
Show the current OSD timeout length.
TIMEOUT 8
SET OUT A OSD INFO
Set the vertical position of the OSD.
VPOSITION N1 8
N1 = 0 ~ 100
[Input port]
[Input port]
[Enable]
[Disable]
[Input port]
[Input port]
[Enable]
[Disable]
[Input port]
[Input port]
[Enable]
[Disable]
[Input port]
[Input port]
[Blue color]
[Input port]
[Timeout in seconds]
[Vertical position in %]
15